Ubbelohde Viscometer LUV-A12 has LCD display screen to show the running status of each measurement unit, precisely 6 units at the same time. It has 6 measuring positions & it can obtain intrinsic viscosity through one point method. There is no need to monitor the process after the start in this viscometer, the auto test runs continuously until the test gets completed. It accurately controls the temperature, time & flow rate of fluid tested. It meets FDA & GLP regulations on experiment data management.
Measuring range | 0.3 - 50000 mm2/s |
Measure position | 6 |
Bath volume | 41 L |
Timing accuracy | 0.01 s |
Temperature range | 5 °C - 95 °C |
Temperature fluctuation & uniformity | ± 0.01 °C |
Temperature accuracy | Better than ± 0.01 °C |
Water bath Inner dimension | 920 × 170 × 320 mm |
Water bath Outer dimension | 990 × 330 × 500 mm |
Heating power | 1 kW, 220 V |
Material applicable | PET, PS, SAN, PBT, PMMA, PCT, PA, PIB, TPU, PAM, PSU, PEN, PC, PLA,CA, PVC, SB, Chitin, PAN, TP etc. |
Display screen controls 6 units at the same time
One point method / single concentration method
Composed of Stainless steel material
Automatic cleaning instead of manual cleaning
No need to disassemble ubbelohde viscometer to avoid manmade damage
All viscosity formulas present in the system, testing personnel can use them conveniently
Data statistics function
Provision of basic data for controlling quality of the products
Can obtain intrinsic viscosity through one point method
Copyright © 2023 Labtron Equipment Ltd. All rights reserved.