labtron.online

Standard Freeze Dryer LPFD-B10

Standard Freeze Dryer LPFD-B10 is designed to handle lyophilization needs for scale up production. Equipped with 6 kg condenser capacity and a temperature of -80 °C for effective lyophilization. It's ideal for freeze drying samples with low eutectic temperatures. The temperature controllable shelves are designed for complete moisture removal and storage facilities of various biological materials. Precise vacuum control enables faster freeze drying and reproducible results.

Condenser temperature -80°C
Condenser capacity 6 kg / 24 h
Freeze drying area 0.4 m2
Bulk capacity 4 L
Vial capacity Φ 12 mm 2600 pieces
Vial capacity Φ 16 mm 1440 pieces
Vial capacity Φ 22 mm 728 pieces
Display LCD touch screen
Shelves 4 shelves
Shelves dimension (L×B) 300×340 mm
Shelf temperature -70°C to +80°C
Final Vacuum < 10 Pa
Voltage 220 V / 50 Hz
Power 2800 W
Dimension (W×D×H) 880 × 735 × 1310 mm
Weight 300 kg

  • Ice condenser capacity is 6 kg / 24 h

  • Condenser temperature (- 80 °C )

  • Vacuum pump oil return

  • Oil mist filtration system

  • Automatic batch control production

  • Clear acrylic door for easy product viewing during processing

  • Easy to clean and anti-corrosion cold trap and operating table

  • Display of sample temperature , vacuum curve degree , cold trap temperature curve

  • Hot gas defrost and smooth-walled condensers for minimal delay between runs

  • Real time alarm for fault detection

  • Automatic data and history save

Standard Freeze Dryer is used to preserve perishable materials, with the goal of extending their shelf life and/or preparing them for transport across biological, biomedical, food processing and preservation etc.

The Bench-top Series boasts a 3-4 kg per 24 hour condensing rate. For water based samples, -55°C condenser is the perfect choice. For samples containing solvents or with low eutectic points, -80°C condenser provides maximum performance. Designed for maximum flexibility and performance, Benchtop Freeze dryers can be customized with a range of accessories to support the needs of Laboratories and Research/Product Development teams.

With the introduction of the pilot freeze dryers, we have established the connecting factor between a typical bench-top freeze dryer used in laboratories and the industrial large scale freeze dryers.

The TLFD is the largest freeze dryer with all the features and advantages of our smaller freeze dryers, but on a production scale, enabling large scale, controllable freeze drying of bulk samples in a single cycle. Featuring the very latest technology in operator control, the TLFD series has user friendly interface which allows freeze drying 'recipes' to be pre-programmed and stored, giving the end user both flexibility and confidence in the control and monitoring of the entire freeze drying process.

Copyright © 2026 Labtron. All rights reserved.